Jetted mixtures of particle suspensions and resins
Change log
Authors
Abstract
Drop-on-demand (DoD) ink-jetting of hard particle suspensions with volume fraction Φ ~ 0.25 has been surveyed using 1000 ultra-high speed videos as a function of particle size (d90 = 0.8-3.6 µm), with added 2 wt% acrylic (250 kDa) or 0.5 wt% cellulose (370 kDa) resin, and also compared with Newtonian analogues. Jet break-off times from 80 µm diameter nozzles were insensitive (120±10 µs) to particle size, and resin jet break-off times were not significantly altered by > 30 wt% added particles. Different particle size grades can be jetted equally well in practice, while resin content effectively controls DoD break-off times.
Description
This is the author accepted manuscript. The final version is available from AIP at http://scitation.aip.org/content/aip/journal/pof2/26/10/10.1063/1.4897238.